August 2025

We estimate typical market prices for SA514 Grade J pressure-vessel steel plate in 2025 to sit roughly in the range USD 650–900 per metric tonne globally depending on region, thickness and testing/traceability requirements; China-origin factory-direct orders (bulk, standard sizes, FOB China) commonly quote toward the lower end of that range while Europe and select U.S. […]

For typical bare 16Mo3 boiler/pressure-vessel plates in 2025, market FOB prices range roughly USD 600–1,200 / metric ton depending on origin, certification, thickness and order size; China ex-stock/FOB quotes are commonly towards the lower end (≈USD 650–1,000/MT), Western European/ mill-grade ex-works prices tend to be higher (≈USD 900–1,200/MT), and North American mill indices in mid-2025

We see DX52D / SGCD1 galvanized sheet trading in 2025 at broadly lower-to-moderate levels versus 2024 peaks: typical FOB China ranges near USD 550–620 / tonne, India list-price pockets near USD 700–770 / tonne, and U.S. domestic offers and mill spot for hot-dipped galvanized (HDG) coils averaging USD 980–1,150 / tonne depending on coating (Z),

For Z120 hot-dip galvanized sheet in 2025 we estimate a typical FOB export price from China in the USD 520–700 / tonne band for standard DX51D+Z coils (depending on thickness, width, quantity and finish), while inland/rolled and value-added products in Europe and the US trade at a premium — recent market checks show Northern Europe

In 2025 the market for ASTM A1011 hot-rolled sheet is broadly characterized by moderated but regionally divergent prices — U.S. mill/spot HRC has generally hovered around ~$800–$1,000 / metric tonne, Western Europe around $650–$900 / t, while Chinese domestic HRC has traded in the ~¥3,300–¥3,700 / t (≈ $460–$520 / t) band (converting with mid-2025

S620QL1 is a quenched-and-tempered, fine-grain structural steel with a minimum yield of 620 MPa, designed for cryogenic/low-temperature service down to −60 °C in its highest-toughness grade. In 2025 typical market prices for S620-class quenched & tempered plates vary widely by region and supply chain conditions — roughly USD 520–1,200 / tonne depending on origin, thickness,

DIN 17102 EStE315 is a normalized, fine-grain structural steel grade commonly used for automotive structural parts and light-to-medium load fabrication. In 2025 the procurement cost for EStE315-equivalent flat steel is strongly regional: China ex-works/FOB offers (plate/HRC basis) remain among the lowest globally (roughly in the low hundreds USD/tonne), Europe’s spot HRC indices sit in the

In 2025 the landed wholesale price of DX51D-based hot-dip galvanized coil used to make galvanized pipe is generally in the range USD $500–1,150 per metric ton, while finished galvanized pipe prices depend strongly on diameter, wall thickness and finish and typically range from ~USD $3–20 per foot (small diameters, retail) to ~USD $700–1,400 per metric

In 2025, Q235 hot-dip galvanized pipe prices are broadly lower in Chinese domestic FOB markets (roughly USD 400–750 / tonne depending on size, zinc weight and quantity) while western markets (US / EU) trade at materially higher levels — roughly USD 900–1,200 / tonne for comparable hot-dip galvanized (HDG) pipe products after local processing, shipping

In 2025, grain-oriented cold-rolled silicon steel (CRGO) shows wide price dispersion by region and grade — typical delivered/FOB ranges are roughly $1,200–$1,800 / metric ton for common transformer grades from Chinese mills, while contract and specialty grades (very low core-loss, ultrathin gauges, or tightly coated laminations) can command premiums and push effective delivered costs well