June 2025

EN10025-2 S235 is a structural steel grade defined in the EN10025-2 standard, which specifies the technical delivery conditions for non-alloy structural steels. S235 is commonly used in a wide range of construction and engineering applications. Key Properties of EN10025-2 S235: Yield Strength: Minimum yield strength of 235 MPa for thickness ≤ 16 mm. Tensile Strength: […]

S235 is a widely used non-alloy structural steel grade specified under the European standard EN 10025-2. The designation “S” stands for structural steel, and “235” indicates the minimum yield strength in megapascals (MPa) for thicknesses up to 16mm. This standard covers hot-rolled products of structural steels, and S235 is one of its most common grades,

Understanding EN 10219 and S235 Steel Grade EN 10219 is a European standard that specifies the technical delivery conditions for cold-formed welded structural hollow sections of circular, square, or rectangular forms. It applies to hollow sections formed cold without subsequent heat treatment. The standard covers a range of steel grades, and S235 is one of

EN 10219: Cold Formed Welded Structural Hollow Sections EN 10219 is a European standard that outlines the technical delivery conditions for cold formed welded structural hollow sections. These sections can be circular, square, rectangular, or elliptical and are manufactured without subsequent heat treatment after the forming process. This standard is crucial for ensuring the quality

EN 10210/S355 Seamless Steel Pipe EN 10210 is a European standard that specifies the technical delivery conditions for hot finished structural hollow sections of non-alloy and fine grain steels. S355 is a common grade within this standard, indicating a structural steel with a minimum yield strength of 355 MPa. Key characteristics of EN 10210/S355 seamless

EN 10083-3 specifies the technical delivery conditions for semi-finished products, bars, wire rod, and coils made of direct-hardening steels, which are generally intended for quenched and tempered parts. The designation “6150” refers to a specific alloy within this standard, characterized by its chemical composition and mechanical properties. Chemical Composition (Typical): The 6150 alloy typically contains

EN 10083-3 is a European standard specifying the technical delivery conditions for quenched and tempered alloy steels. Among these, the grade 42CrMo4 is a prominent chromium-molybdenum alloy structural steel, widely recognized as the European equivalent to AISI 4142. This steel is highly valued for its excellent combination of strength, toughness, and wear resistance after heat

EN 10083-3 specifies the technical delivery conditions for semi-finished products, hot formed, e.g. blooms, billets, slabs, bars, wire rod, wide flats, plates, universal flats and sections and continuously cast semi-finished products, as well as hot or cold rolled sheets/plates and strips of the direct hardening alloy steel grades listed in Table 3 (chemical composition) and

EN 10083-3 specifies the technical delivery conditions for semi-finished products, hot rolled bars, rods, wire rod, wide flats, heavy plates and strip made of direct hardening alloy special steels. The steel grade 4135 is included in this standard. Key Characteristics of EN 10083-3 4135 Alloy Structural Steel: Composition: Typically contains chromium, molybdenum, and manganese as

Grain Oriented Silicon Steel (GOES) is a specialized electrical steel alloyed with silicon, typically around 3-3.5%, renowned for its anisotropic magnetic properties. This means its magnetic characteristics, particularly high permeability and low core loss, are optimal along a specific crystal orientation, known as the rolling direction or “easy magnetization” direction. This orientation is deliberately achieved