June 2025

Fine Grain P355ML2 Pressure Vessel Steel Plate P355ML2 is a normalized fine grain pressure vessel steel grade. This material is characterized by its excellent weldability and high resistance to brittle cracking. The “P” designates it as a pressure vessel steel, “355” indicates the minimum yield strength (355 MPa), “ML” signifies it’s for low-temperature service, and […]

Carbon steel coil is a foundational material in numerous global industries, valued for its strength, formability, and cost-effectiveness. The properties of these coils are largely dictated by their carbon content, which influences hardness, tensile strength, and ductility. Coils are typically produced through hot-rolling or cold-rolling processes, each imparting distinct characteristics suitable for different applications. Common

EStE380 is a type of high-strength low-alloy (HSLA) structural steel plate. It’s characterized by a good combination of strength, weldability, and formability, making it suitable for various engineering applications. Key Properties and Characteristics High Yield Strength: EStE380 offers a minimum yield strength of 380 MPa (Megapascals), providing excellent resistance to deformation under load. Good Weldability:

EStE355 is a high-strength low-alloy (HSLA) structural steel plate grade, known for its good weldability and formability in addition to its higher strength compared to mild steel. Key Properties of EStE355 Steel Plate High Yield Strength: EStE355 has a minimum yield strength of 355 MPa, offering superior load-bearing capacity. Good Weldability: Suitable for various welding

ERW (Electric Resistance Welded) steel pipe is a type of welded steel pipe manufactured by longitudinally welding steel coils. The process involves using electric current to heat the edges of the steel strip to a temperature high enough to form a weld. ERW Steel Pipe Manufacturing Process Uncoiling and Forming: Steel coils are uncoiled and

EN10028 16Mo3 Boiler steel plate EN10028 16Mo3 is a pressure vessel steel grade specified in the EN10028 series of European standards. It is a weldable molybdenum alloyed steel designed for elevated temperature service. Here’s a breakdown of key information: Chemical Composition: C: 0.12-0.20% Si: ≤0.35% Mn: 0.40-1.20% P: ≤0.025% S: ≤0.010% Cr: ≤0.30% Mo: 0.25-0.35%

EN10025-2 S355 is a widely utilized high-strength low-alloy (HSLA) structural steel grade, typically supplied as hot-rolled products. It offers an excellent combination of high strength, good toughness, and commendable weldability and formability, making it suitable for a diverse range of demanding applications. Key Characteristics of S355 Steel Standard and Designation: S355 steel is specified under

EN 10025-2 S355 is a widely utilized high-strength, low-alloy (HSLA) structural steel grade supplied in the hot-rolled condition, often as coils. The designation “S” stands for structural steel, and “355” indicates the minimum yield strength of 355 MPa for thicknesses up to 16mm. This standard, EN 10025-2, specifies the technical delivery conditions for non-alloy structural

EN10025-2 S275 is a widely utilized non-alloy structural steel grade, designated under the European standard EN 10025-2:2019 (Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels). The “S” signifies structural steel, and “275” indicates the minimum yield strength in MPa for thicknesses up to 16mm. Chemical Composition The

EN10025-2 S275 is a widely utilized non-alloy structural steel grade supplied in a hot-rolled condition. The designation ‘S’ indicates structural steel, while ‘275’ refers to its minimum yield strength of 275 MPa for thicknesses up to 16mm. This standard specifies the technical delivery conditions for flat and long products of hot-rolled non-alloy structural steels. Key