June 2025

400 wear-resistant steel plate, commonly designated with terms like NM400, AR400, or similar proprietary grades, is a high-strength, abrasion-resistant alloy steel. Its defining characteristic is a nominal Brinell hardness value of approximately 400 HBW, achieved through quenching and sometimes tempering processes. This hardness level provides a superior defense against wear caused by abrasion, friction, and […]

A 4 galvanized 16 gauge coil refers to a specific type of steel product characterized by its dimensions, protective coating, and thickness. Understanding these parameters is crucial for selecting the right material for various applications. Understanding the Specifications Let’s break down what each part of “4 galvanized 16 gauge coil” signifies: “4”: This number typically

Hot-dipped galvanizing is a process where steel coils are immersed in a bath of molten zinc, typically at around 450°C (840°F). This results in a metallurgically bonded zinc coating that provides exceptional corrosion protection to the underlying steel by forming a barrier and offering sacrificial protection. Key Attributes of Hot-Dipped Galvanized (HDG) Coils Superior Corrosion

Calculating the Weight of 3/4″ Carbon Steel Plate The nominal weight of a 3/4 inch thick carbon steel plate per square foot is a key parameter for many construction and fabrication projects. Understanding this value is crucial for accurate material estimation, shipping calculations, and structural design. Standard Calculation Method To determine the weight per square

3/16 inch galvanized proof coil chain is a general-purpose chain widely used for a variety of non-overhead lifting applications. The “3/16 inch” refers to the nominal diameter of the steel wire used to form the links. It is a staple in hardware, agricultural, and industrial settings when purchased in bulk quantities. Key Characteristics Material: Typically

A 3/16 inch (approximately 4.76mm) high-strength steel plate refers to a flat steel product of this specific thickness, engineered to provide superior mechanical properties compared to standard carbon steels. These plates are typically part of the High-Strength Low-Alloy (HSLA) steel family, offering an optimized combination of strength, toughness, and often improved atmospheric corrosion resistance. Common

To determine the weight of a 3/16 inch carbon steel plate, we utilize the formula: Weight = Area × Thickness × Density. The nominal density of carbon steel is generally taken as 490 pounds per cubic foot (lbs/ft³) or 7.85 grams per cubic centimeter (g/cm³), which translates to approximately 7850 kilograms per cubic meter (kg/m³).

Understanding 26 Gauge Galvanized Steel Coil 26 gauge galvanized steel coil refers to a specific thickness of steel sheet that has been coated with a layer of zinc to protect it from corrosion. The “gauge” is a measure of thickness, with lower numbers indicating thicker steel. Galvanization significantly extends the lifespan of the steel, especially

A 26 gauge x 3.300 galvanized steel coil refers to a specific type of flat-rolled steel product primarily used in applications requiring good corrosion resistance and formability. Understanding its distinct specifications is key for its proper application. Decoding the Coil Specifications Gauge (26 ga): The term “26 ga” indicates the thickness of the steel sheet.

24 inch galvanized coil stock refers to a continuous roll of steel sheet that has been coated with a layer of zinc to protect it from corrosion. The “24 inch” specification denotes the width of the steel coil. This material is widely utilized across various industries due to its durability and protective qualities. Key Properties