June 11, 2025

EN 10083-3 specifies the technical delivery conditions for semi-finished products, hot formed, e.g. blooms, billets, slabs, bars, wire rod, wide flats, plates, universal flats and sections and continuously cast semi-finished products, as well as hot or cold rolled sheets/plates and strips of the direct hardening alloy steel grades listed in Table 3 (chemical composition) and […]

EN 10083-3 specifies the technical delivery conditions for semi-finished products, hot rolled bars, rods, wire rod, wide flats, heavy plates and strip made of direct hardening alloy special steels. The steel grade 4135 is included in this standard. Key Characteristics of EN 10083-3 4135 Alloy Structural Steel: Composition: Typically contains chromium, molybdenum, and manganese as

Grain Oriented Silicon Steel (GOES) is a specialized electrical steel alloyed with silicon, typically around 3-3.5%, renowned for its anisotropic magnetic properties. This means its magnetic characteristics, particularly high permeability and low core loss, are optimal along a specific crystal orientation, known as the rolling direction or “easy magnetization” direction. This orientation is deliberately achieved

DX53D/ SGCD2/SGCD3 galvanized sheet refers to steel sheet coated with zinc to protect against corrosion. These designations specify material grades and coating types, commonly used in various applications. Material Grades: DX53D: A European standard (EN 10346) designation for continuously hot-dip zinc-coated steel flat products. It’s suitable for general forming applications. SGCD2/SGCD3: Japanese standard (JIS G

Galvanized steel coils, specifically grades DX53D, SGCD2, and SGCD3, are widely utilized across various industries due to their excellent formability and corrosion resistance. The galvanization process involves coating the steel with a layer of zinc, which provides sacrificial protection against rust, significantly extending the material’s lifespan. DX53D Galvanized Coil DX53D is a steel grade designated

DX52D and SGCD1 are designations for hot-dip galvanized steel sheets known for their excellent formability, specifically designed for drawing applications. These grades are widely used in industries requiring components with complex shapes and good corrosion resistance. DX52D: European Standard (EN 10346) DX52D is a drawing quality steel grade specified under the European standard EN 10346.

DX52D and SGCD1 are designations for specific grades of hot-dip galvanized steel coils, prized for their forming capabilities and corrosion resistance. These materials are widely used in various industries where both malleability and protection against environmental degradation are crucial. Understanding DX52D DX52D is a European standard (EN 10346) steel grade. The ‘D’ signifies its suitability

DX52D galvanized pipe is a type of steel pipe coated with zinc through a hot-dip galvanizing process. The DX52D designation refers to the steel grade, indicating its suitability for drawing and forming applications. Key Features of DX52D Galvanized Pipe Corrosion Resistance: The zinc coating provides excellent protection against rust and corrosion, extending the pipe’s lifespan.

Understanding DX51D and SGCC Galvanized Steel Coils Galvanized steel coils are extensively utilized across diverse industries, prized for their exceptional corrosion resistance and good formability. Among the commonly specified grades are DX51D and SGCC. While these grades originate from different international standard systems, they often serve similar functions in a wide array of applications. DX51D:

DX51D and SGCC are widely recognized grades for hot-dip galvanized steel coils, primarily used for applications requiring good formability and corrosion resistance. While they originate from different standardization systems, they often serve similar purposes in the industry. DX51D Galvanized Steel Coil DX51D is a European standard (EN 10346) designation for continuously hot-dip coated steel flat