June 2025

Understanding 1095 Carbon Steel 1095 carbon steel is a high-carbon steel renowned for its excellent hardness, wear resistance, and ability to hold a sharp edge. It typically contains approximately 0.90% to 1.03% carbon, making it one of the highest carbon content steels commonly available in plate form. These properties make it a preferred material for […]

1095 carbon steel is a high-carbon steel renowned for its ability to achieve high hardness and excellent wear resistance after proper heat treatment. With a nominal carbon content of 0.95%, it is one of the most common choices for applications demanding sharp edges and durability, particularly in plate form for various manufacturing processes. Key Properties

Understanding 1080 Carbon Steel Plate 1080 carbon steel is a high-carbon steel, designated by its approximate 0.80% carbon content. This places it in the category of steels known for their ability to achieve high hardness and strength through heat treatment. As a plate, it offers a versatile raw material form for various manufacturing processes. Key

The nominal density of 1045 carbon steel plate is a critical physical property used in various engineering and manufacturing calculations. This value is widely recognized and consistently applied across the industry. Key Density Value The generally accepted density for 1045 carbon steel is approximately 7.85 g/cm³ (grams per cubic centimeter). This can also be expressed

1020 carbon steel is a low-carbon (mild) steel known for its good formability, weldability, and machinability. It is one of the most commonly used plain carbon steels and is often utilized in applications where high strength is not the primary requirement, but good ductility and surface finish are desired. Chemical Composition The typical chemical composition

1018 carbon steel is a low-carbon steel grade known for its excellent combination of ductility, strength, weldability, and machinability. It is one of the most commonly available grades in the market, widely used for a variety of general engineering and manufacturing applications. Key Properties of 1018 Steel Plate The typical characteristics of 1018 steel plate

Calculating the weight of a 1 carbon steel plate requires knowing its dimensions (length, width, and thickness) and the density of the steel. Here’s the formula: Weight = Length x Width x Thickness x Density Where: Length, Width, and Thickness are typically measured in meters or inches. Density of 1 carbon steel is approximately 7850

Calculating the weight of a 1/8 inch carbon steel plate involves understanding its dimensions and the density of the material. Here’s the breakdown: Thickness: 1/8 inch = 0.125 inch Density of Carbon Steel: Approximately 0.284 lbs/cubic inch (This can vary slightly based on the specific alloy) To calculate the weight, you’ll also need to know

1 8 carbon steel plate weight Calculating the weight of a 1/8 inch carbon steel plate requires understanding the formula: Weight = Thickness x Width x Length x Density. First, convert all measurements to the same unit, typically inches. A 1/8 inch plate is 0.125 inches thick. You then need the width and length of

1.0070 is the designation of a carbon steel plate, also known as 1716 according to EN 10027-2. This material is a non-alloy quality steel. Key Properties: Weldability: Generally good with appropriate techniques. Formability: Offers reasonable formability for general purposes. Strength: Moderate tensile and yield strength. Common Applications: General fabrication Structural components Automotive parts (non-critical) Machinery