June 18, 2025

XC48TS is a designation typically associated with a carbon steel grade, often implying specific characteristics or treatments. The “XC” prefix is common in French standards (AFNOR) for unalloyed or low-alloy carbon steels, with the “48” generally indicating a nominal carbon content of around 0.48%. Key Properties of XC48TS Steel As a medium carbon steel, XC48TS […]

Understanding G90 Galvanized Steel Sheet G90 galvanized steel sheet refers to steel that has been coated with a layer of zinc to protect it from corrosion. The “G90” designation is crucial as it specifies the minimum total zinc coating weight on both sides of the sheet, typically applied through a hot-dip galvanizing process. Specifically, G90

A36 steel plate is a widely used carbon steel known for its strength, formability, and weldability. Here’s a concise overview: Key Properties: Tensile Strength: 58,000-80,000 psi Yield Strength: 36,000 psi minimum Excellent weldability Good for forming, machining, and drilling Common Uses: Structural applications: bridges, buildings General fabrication: base plates, brackets Construction equipment When sourcing A36

Seamless steel pipes are manufactured without a welded seam, providing superior strength and pressure resistance. This characteristic makes them ideal for demanding applications where reliability under stress is crucial. The production process is complex, involving the transformation of solid steel billets into hollow cylindrical forms. Core Manufacturing Process The journey of a seamless steel pipe

ASTM A710 is a specification for high-strength low-alloy (HSLA) structural steel plate. It is specifically a precipitation-strengthened, niobium-vanadium structural steel, often supplied in the as-rolled, normalized, or quenched and tempered condition. This steel is primarily used in applications requiring high strength-to-weight ratios and good toughness. Key Characteristics of A710 Steel Plate A710 steel plates offer

Oil Country Tubular Goods (OCTG) are a family of seamless and welded steel pipe products used in the exploration and production of oil and gas. These products are critical for drilling wells, lining the wellbore, and transporting hydrocarbons from the reservoir to the surface. The integrity and performance of OCTG are paramount to the safety

The thickness of 14 gauge material in millimeters (mm) varies significantly depending on the material type (e.g., steel, stainless steel, aluminum) and the specific gauge standard being referenced. Gauge is a system for specifying the thickness of sheet metal or the diameter of wire, where a higher gauge number typically indicates a thinner material. 14

ASME PVQ (Pressure Vessel Quality) steel plates are a specific category of steel designed and manufactured for use in boilers, pressure vessels, heat exchangers, and other equipment intended to operate under pressure. These steels must meet stringent requirements set forth by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) to

4130 steel plate is a highly versatile and widely utilized chromium-molybdenum (CrMo) alloy steel. It is classified as a low-alloy steel, renowned for its excellent combination of strength, toughness, weldability, and fatigue resistance, particularly when supplied in a normalized or quenched and tempered condition. Key Characteristics of 4130 Steel Plate Composition: Primarily iron, with nominal

A633 Steel Plate: An Overview ASTM A633 is a standard specification for normalized high-strength low-alloy (HSLA) structural steel plates. These plates are primarily intended for welded, riveted, or bolted construction where superior notch toughness at low atmospheric temperatures is a critical requirement. The normalizing heat treatment is essential for achieving the desired microstructure and mechanical