May 2025

China stands as a principal global hub for the production and export of carbon steel plates, catering to a wide spectrum of industrial applications. These plates, valued for their strength, versatility, and cost-effectiveness, are integral to sectors such as construction, shipbuilding, machinery manufacturing, and pressure vessel fabrication. Key Considerations When Selecting a Carbon Steel Plate […]

ST52 is a widely recognized low-carbon, high-strength structural steel grade, primarily known under the German DIN 17100 standard. While now largely superseded by the European EN 10025 standard (specifically grade S355JR), ST52 remains a common reference point in many industries due to its excellent combination of mechanical properties. Key Characteristics of ST52 Steel Plate ST52

Spots on carbon steel plates refer to various surface imperfections, discolorations, or localized defects. These can range from minor cosmetic issues to indicators of more significant material degradation or contamination. Common Causes of Spots on Carbon Steel Plates Corrosion (Rust): This is the most prevalent cause. Exposure to moisture, oxygen, and atmospheric pollutants or corrosive

S50C is a Japanese Industrial Standard (JIS G4051) grade of medium carbon steel, widely recognized for its excellent balance of strength, toughness, and wear resistance, particularly after appropriate heat treatment. Its good machinability in the as-supplied or normalized condition further enhances its suitability for various engineering applications. Chemical Composition of S50C The performance characteristics of

Understanding S275JR Carbon Steel Plate S275JR is a widely used non-alloy structural steel grade designated according to the European standard EN 10025-2. The designation breaks down as follows: S: Indicates it is a Structural Steel. 275: Refers to the minimum yield strength of 275 MPa (megapascals) for thicknesses up to 16mm. This value decreases slightly

Carbon steel 5/16 inch plate refers to a flat-rolled steel product with a nominal thickness of 0.3125 inches (approximately 7.94 mm). It is primarily an alloy of iron and carbon, with carbon content typically up to 2.1% by weight, though for plate applications, lower carbon content is common, enhancing weldability and formability. Key Characteristics Strength

Galvanized steel wire can indeed be utilized for making coils. However, its suitability is critically dependent on the intended application and the specific properties required of the coil. Key Characteristics and Benefits Corrosion Resistance: The zinc coating inherent to galvanized steel offers superior protection against rust and environmental degradation, making it ideal for coils in

C45 carbon steel is a medium carbon steel offering moderate tensile strengths, good machinability, and reasonable wear resistance. It is widely used in various engineering applications where higher strength and hardness are required compared to low carbon steels. Key Characteristics of C45 Steel Plate C45 steel, also known by designations such as 1.0503 or EN8/080M40

The Brazilian Oil Country Tubular Goods (OCTG) market is a critical segment supporting the nation’s extensive oil and gas exploration and production activities, particularly in the pre-salt offshore fields. While Brazil possesses domestic OCTG manufacturing capabilities, a significant portion of its demand is met through imports from various countries, each contributing differently based on product

Black steel seamless pipes are a type of carbon steel pipe manufactured without a welded seam. This seamless construction is achieved by heating and piercing a solid steel billet, then rolling and drawing it to the desired dimensions and wall thickness. The “black” designation refers to the dark iron oxide scale formed on the steel’s